Omega Prime GUI
INITIALIZATION WINDOW

---

Omega-Prime Homepage

Omega-Prime Observer's Manual

MPIA Homepage

---

Observer: Specify the observer(s) in this window, without the use of spaces.

Camera: Select Omega Prime_IRL on the camera menu, which makes use of the Infrared Labs electronics. At some point in the future, we will be switching to a new set of electronics built at MPIA, but this is not currently available.

Camera-Optic: The Wide Field option should be selected under the optics menu. There is no other mode for Omega-Prime!

Status and Motors should both default to on.

Temp.Controller: Omega-Prime does not currently have a temperature controller.

Telescope: select CA3.5m for the telescope. This is the only telescope on which Omega-Prime is available.

Focal-Ratio: should be set to f/3.5, which is the prime focus of the 3.5m telescope.

Status: If the telescope is up and running, select on for the telescope status.

When you are satified with the selections, click on the OK button to initialize the GUI.

---

Peter Bizenberger	Dave Thompson
biz@mpia-hd.mpg.de	djt@mpia-hd.mpg.de
Phone: +49 (6221) 528-311	Phone: +49 (6221) 528-224